Skip Navigation

Easy On Easy Off Loading


Bike Loading OneBefore the bus arrives, secure or remove any loose items from your bike. Wait for the bus on the sidewalk. Alert the bus operator that you want to load your bike.

While holding your bike with one hand, squeeze the handle to release the latch and lower the rack.



Bike Loading TwoLoad your bike from the front or the sidewalk side of the bus.
Place the wheels in the wheel slots. A label tells you where the front wheel goes.




Bike Loading ThreeSteady the bike and raise the support arm over the front tire as high as it will go, but not over the frame or fender. You are responsible for properly securing your bike to the rack.

Please sit or stand near the front of the bus, to keep your bike in view, and alert the operator one stop before your intended destination. Exit through the front doors and make sure the operator sees you before you step off the curb to unload your bike.


  • To unload your bike, raise the support arm off the tire and move it down and out of the way.
  • Lift your bike from the rack.
  • If the rack is empty and no one else is waiting to load a bike, fold up the rack until it locks in place.
  • Carry your bike off the roadway to the sidewalk. Signal to the operator that you are clear of the bus.